The Jensen Mechless RV Stereo # JWM20 can receive a Bluetooth signal from devices like your phone to play audio but will not send a Bluetooth signal out to speakers. You would have to wire the stereo system to the speakers. I've included the wiring harness diagram to help you determine the correct wires to run to the outside speakers. view full answer...
Sorry for any confusion but the Jensen Heavy Duty Outdoor RV Speaker # 1103050 that you referenced is an outdoor speaker. You could use it in an indoor application if you wanted to but it was designed to withstand outdoor use. view full answer...
Yes, you can use 6 ohm speakers with the iRV Digital In-Wall Receiver # 292-101079. Each channel on the unit can handle a speaker rated at 4 to 8 ohms. I have linked a video review of this unit for you. view full answer...
I'd be happy to find a replacement stereo system for your RV if you could provide the cutout hole size of your old stereo system. We carry a small variety of speakers that could be used for your setup, like the Jensen Marine Speakers # MS5006BR. Without knowing the actual cutout hole size it's a bit hard to narrow down the correct speakers to fit. The stereos that we carry wouldn't be compatible with wireless speakers since their Bluetooth functions are one way (phone to stereo) and wouldn't... view full answer...
Yes, the Furrion RV Stereo, # DV1230BL does have a connection for a subwoofer and a 3-Zone output. But only allows for up to 6 speakers to be connected. While this will not be a plug and play install mating to your current connectors, it has easy to follow installation instructions and wiring schematic.
I recommend the Jensen RV Stereo, # JWM60A that is also a 3-Zone output but allows for up to 8 speakers to be connected. But you would need to use an external amplifier to drive the sub-woofer... view full answer...
The iRV RV Stereo part # iRV34 is a double din stereo which refers to the size. The majority of touchscreen stereos are also double din so this should be a good replacement size wise although slight trimming may be required between different models.
In regards to the satellite, this would not be hooked up directly to the stereo but rather to the TV and then the TV would be hooked up to the stereo. That said, this would indeed allow you to play the sound from the TV through the stereo... view full answer...
Without the model number of the speakers I wouldn't know the actual dimensions of them since there's no registry for what is used in a trailer. That being said I can give you the dimensions of the Jensen Marine Speakers # MS5006BR that you were looking at and you can verify if it's a match.
These speakers have mounting holes that are 3-3/4" from side to side or top to bottom and 5-1/2" diagonally. The exterior cover is 6" in diameter and requires a 4-3/8" wide x 1-1/2" deep cutout hole. view full answer...
The RV Stereo with Remote - CD/DVD Player - Bluetooth - USB - 12V/24V # 324-000031 has the Bluetooth receiver to allow a phone or other device to send the music to the stereo. It does not however have the ability to transmit to a Bluetooth speaker. I reached out to the manufacturer to confirm this. view full answer...
The Jensen RV Stereo # JWM70A has three zones which allow you to adjust volume in three different places basically. You'd need to determine which zone controls the outside speakers and turn it down or mute it. view full answer...
The Jensen Touch Screen part # VX4022ARTL allows you to hook up 4 speakers so you can play music or audio in two different rooms but the speakers do not work independently of one another. Basically you can use the speakers in two different rooms and use the fading option on the screen to fade 2 of the speakers out if you didn't want audio in both rooms but you can't completely turn off the audio in one of the rooms.
If you want a Jensen Stereo with a 3 zone audio option, I recommend Jensen... view full answer...
RV speakers are fairly easy to replace and we do have one model that comes with a 6-1/2" diameter grille with the Jensen Marine Speakers # MSX65R. These speakers, like most, are recessed mount so you'll really want to remove one of your current speakers and measure the cutout hole to ensure compatibility. These specific speakers require a 5-1/4" diameter x 2-5/16" deep cutout hole and a 4" spacing from center to center of the mounting holes. They will come with both silver and white grilles... view full answer...
Your Linear RV5090 media center has maximum 120 watts power output. 25 watts x 4 channels (Speaker sets A and B) + 10 watts x2 channels (Speaker set C).
The Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V # JWM60A has a maximum power output of 48 watts (6W x 8 channels). It's going to work but will not have as robust of a sound. This can be fixed by increasing the wattage with an amplifier like the Jensen Bluetooth Amplifier - 2 Channel - 80 Watts # JAHD240BTR and wiring... view full answer...
If they’d like to connect a head unit like the Item # JWM20 to a wireless Bluetooth speaker, you would need to run it by auxiliary for it to work while connected to the radio. view full answer...
I pulled this speaker from inventory to take a picture and measurements. The diameter at the outside edge of the grill is 5-9/16". The mounting hole diameter is 4-7/16" The center of the screw holes are inset 1/4", so the diameter measured at the screw hole centers is 5-3/8". I have attached a dimensioned picture of these measurements. view full answer...
If your RV stereo is only playing to one set of speakers then you either don't have the zone turned on, have loose wiring, a bad set of speakers, or an internal issue with the stereo that's preventing it from sending power through the wiring.
The first thing I would check is that the zone for those speakers is turned on. From there I would check the wiring, as it could be just a loose connection at either the stereo or speaker or some corrosion to the wire at the connection points. I... view full answer...
No, the Jensen RV Stereo # JWM60A Bluetooth functionality is limited to only receiving a Bluetooth signal from your phone. You would need to wire the unit to any speakers to get them to work in conjunction. view full answer...
Jensen RV USB/Bluetooth Stereo # JWM60A is an ideal choice as a replacement for the Concertone ZX75 and according to Jensen it is directly compatible. You can refer to the linked photos that show the main electrical connector/pigtail assembly that is included with # JWM60A. The instructions are also included for you and these have details on the wiring pigtail.
This unit is what is called a "double DIN" size which simply means it fits a standard opening that measures 9 wide x 6 tall x... view full answer...
I spoke with my contact at Quest Audio Video who said that the iRV Digital In-Wall Receiver # 292-101079 would be a great product for your application. It is compatible with 6 speakers and 1 sub (that is powered with an amp) similar to what you have.
This is a multi zone system with bluetooth capability and it even comes with a remote for ease of use!
I have linked a review video for you to check out. view full answer...
Based on your dimensions listed the Jensen Indoor RV Speaker # 1102094 would work for your. To install it you'd want to reuse the hardware holding on your old speakers and to make the wiring connections you could solder them or use female spade connectors on your current speaker wiring. view full answer...
That sounds like the increased amperage draw on the power system of the trailer is causing the Jensen RV stereo part # JWM60A to not have enough power for the amp to power your speakers. I would check to make sure the battery is power system is adequate and that your battery is in good shape. view full answer...
Go To Results